For data sending/receiving between your computer and the temperature controller, this software is necessary. (Alternative software can also be used.)

The temperature controller can be operated by using a personal computer so that checking temperature control is possible even before construction of the entire system is complete. Besides, time required for setting is reduced by using a personal computer for reading and processing the temperature measurement data or writing settings in a batch.

All communication commands supported by the temperature controller can be confirmed on a personal computer. Trend graph and such can be created with ease, using the log function of the software and a spreadsheet commercially available.

All our products with communication function. Note that installation of our protocol is a prerequisite.
Products with communication function are listed below. (Select the communication option.)
TTM-004/005/006/009
TTM-204/205/207/209

A personal computer and the temperature controller are connected via a signal converter.

Up to 31 units are connectable.

We retain copyright. Use, duplication, redistribution and modification are permitted; however, we will not guarantee or be liable with troubles possibly caused by the use of the program.

• Operating system: Japanese or English version of WindowsXP, Windows98 or Windows95 (Service Pack 1 or higher)
• Computer main unit: Personal computer built in with Pentium CPU (90 MHz or faster recommended)
• Recommended converter: Model KS-485 from System Sacom Sales Corp.

1. Click the program file name located in the bottom of the screen.
   
   

   (1.51MB)

   
   
2. Tick "Save" and save (download) the file to the personal computer (Fig. 1).
   * Select a file saving location easy to find.
   (Fig. 1)
3. Double-click the saved (downloaded) file "comsamp2_install.exe." The install starts.
   * Follow instructions during the install.

Upon completion of the install, start the program by clicking the start button and selecting "program," "communication sample" and then "communication sample software2."