The loader software is a program that transfers data to and from a personal computer.

Using a personal computer makes it possible to manipulate a temperature controller, managing the temperature even before the system is completed. The loader software also makes it possible to import measurement temperatures to the personal computer and manipulate them as data, and also write settings to the personal computer collectively to speed up the time needed to complete the system.

The loader software can verify the complete suite of communication commands supported by a temperature controller. The loader software, when coupled with the program's log function and a commercial spreadsheet, lets you create trend graphs with ease. The loader software itself also comes with a trend graph capability.

The loader software works with the following products:
TTM-204/205/207/209/04SP

Connect a personal computer and a temperature controller using a loader cable (specified by us).

One-to-one connection.

The loader is copyrighted by us. The loader software can be used, duplicated, redistributed and modified without restriction, though we do not take any responsibility for problems that may result from using the program.

• English version operating systems
  Windows XP SP2, Vista
• Computer mainframe
  Personal computer onboard with Pentium CPU
  (Pentium 300 MHz or faster recommended) (Windows XP SP2)
  (1GHz or faster recommended) (Windows Vista)
• A separate loader driver is necessary

1. Click DOWN LOAD 1 for normal procedure. If your computer has already been installed with Framework 2.0, click DOWN LOAD 2.
   
   

   Down Load 1		Ver:6.00+Framework2.0	(33.1MB)
   Down Load 2		Ver:6.00	(6.78MB)

   
   
2. When the message shown below appears, click SAVE button and download the file.
   (Make sure to download where it is easy to access)
   
   
3. From the right-click menu, select "property" of the downloaded zip file and "Unblock" the file. If the file has been Unblocked already, the "Unblock" button will not appear.
   
   Then, extract the zip file. From the right-click menu, select "Extract All···", then click "Next" button.
   
   

After extracting the file, proceed with setup by referring to TTM Series Loader Software Setup Procedures (PDF).

Refer to Loader Software Instruction Manual (PDF).