Sheath Type
Sheathed temperature sensor is flexible and excels in durability and thermo-resistance. It can be incorporated into any product based on user demands. Temperature sensor elements are available in two kinds, thermocouple and resistance temperature detector.
Protection Tube Type
Protection Tube type sensors are available not only with stainless steel but with titanium as well. Its surface finish can be made in sanitary processed or electropolished. Temperature sensor elements are available with thermocouple, resistance temperature detector and thermistor.
Ultra-fine Sheath Type
Ultra-fine Sheath type temperature sensor comes with outer diameters of 0.15, 0.25 & 0.5 mm, best fit for temperature measurement of a very small area. Only K thermocouple is available as its temperature sensor element. (N, J and T thermocouples are available only with outer diameter of 0.5 mm).
Fluororesin Tube Type
Since fluororesin is used as the material for the protection tube, it is excellent for temperature measurement where chemical resistance such as "acid" and "alkali" is required. Temperature sensor elements are available with thermocouple, resistance temperature detector and thermistor.
In-line Temperature Sensor (Ordinary Type)
It can be used for washing semiconductors and printed circuit boards, etching, plating chemical lines, etc.The minimum tube diameter is available from 1/4 inch(or 6 mm outer diameter), and temperature settings near points of use such as chemical application nozzles which was previously impossible, are now possible.Since both ends are configured with joints, it is easy to assemble and replace as well.
In-line Temperature Sensor (General Purpose Type)
It can be used for washing semiconductors and printed circuit boards, etching, plating chemical lines, etc. Since both ends are structured with PT1/4, it is easy to assemble and replace.
Humidity-Voltage Converting Module TSM-H1
Humidity-voltage converting module that outputs 0 to 1V analog voltage that is linear with respect to relative humidity of 0 to 100% RH.
It has excellent durability with aging variation of 1% RH/year or less (at room temperature and humidity).
The built-in stabilized power supply stabilizes the output even when the power supply voltage changes between 5 to 16V.
In some products, only the humidity sensor element can be replaced and circuit adjustment is not required.
Humidity Converter TSM-H2/H3
Humidity converter that converts relative humidity into an analog electric signal.
It has excellent durability in high temperature and high humidity atmospheres and condensation.
Humidity Sensor TSM-H4 Series
An industrial humidity sensor that can be used in a wide range of applications from environmental equipment to measuring equipment as well as industrial equipment. Converts relative humidity to "voltage" or "current". The "sensor part" and "control part" are separated so that they can easily be attached to the equipment. The filter cap is replaceable which allows the improvement of the environmental resistance such as drip-proof for dew condensation environment, dust proof and heat resistance.
Thermometer With Electronic Paper Display TRA-700
TRA-700 is a thermometer with an electronic paper display that can replace the mercury thermometer.
It is a countermeasure product to comply with the prohibition of manufacturing products using mercury at the end of 2020 and onward. It can be used for various industrial applications such as ship engine exhaust gas measurement.
